-
Project Magenta Setup
Hey guys,
Ive been looking at the Project Majenta for some time and am considering using this over PMDG for my 737NG.
Could someone give me the run down on how it works, like how many computers you would need to run it, how the PC's are networked etc.
Maybe share some diagrams of your Project Magenta Setup.
Cheers
-
Gidday,
in this manual you may find answers to most of your questions:
http://www.projectmagenta.com/resour...gentaDoc11.pdf
Cheers
-
Thanks, i have read this but im basically after what others have done in there setup using Project Magenta.
If they could describe their project, how many PC,s were used etc. using Project Magenta and how easy they found it to set up?
René Billiani "Did you use Projecta magenta?"
-
Well, here we go:
Yes, I use Project Magenta!
My setup consists of 6 computers:
No. 1: Flight Simulator 2004
No. 2: PMsystems (connected to the overhead panel)
No. 3: PM Boeing Glass Cockpit (PFD and ND Captain) + PM CDU
No. 4: PM Boeing Glass Cockpit (PFD and ND FO) + PM RCDU
No. 5: PM Boeing Glass Cockpit (Upper EICAS + Lower EICAS)
No. 6: PM Instructor Station
All 6 computers are connected via WideFS
On the computers with the PM Glass Cockpit you need newer graphic cards with a good Open GL performance to ensure a clean and fluid display.
The setup is very easy, took me 5 minutes for each client.
-
Thanks for taking the time to document that, your sim is one i look at regularly, that kinda paints a clearer picture.
With regards to the computers do they all need to be powerful ones ? or just the ones with PM Glass. ?
-
Here's ours http://www.insitesolutions.com.au/73...C_hardware.htm
Although its changed a bit. The KVM/VGA switch is gone (replaced by UltraVNC software), and PC05 and PC03 both have dual head outputs now and we've added 8" touchscreens off each for dual EFB.
-
Hey
My setup is as follows. 1.flightsim machine running pmsounds. 2.Glass cockpit PFD/ND and MCP. 3.Glass cockpit ECAS and stanby inst. 4.PM Instructor station and VATSIM 5.PM SYSTEMS and CDU. 6.Active Sky 7.SAWXR and PM Getweather.
Everything works through FSUIPC and WIDECLIENT
Best regards.
Trev
-
Ok, here is my setup for my B744 cockpit
PC1 Amd 4800+ FLIGHTSIM + MCP
PC2 Amd 4800+ (CAPt PFD/ND) + CDU
PC3 Intel 3,2 Ghz (F/O PFD/ND) + RCDU
PC4 EICAS
PC5 LOWER EICAS ( very low end machines)
PC6 Intel 3,2Ghz PM SYSTEM, PM SOUNDS, PM get weather - Active Sky +other system programs as refueling , time sync
Pls also note that you can not use the PMDG logic together with PM
B. Rgds
Michel
-
Hi,
Part way through my build but my plan is:
PC1 - AMD64 x2 4800 - FS + Pmsystems & Radar Contact (FS9 only uses 1 core of the dual CPU so I reckon Pmsystems,RC & OS will run ok on the other core) - H/W attached will be OVHD
PC2 - AMD64 4000 - PM GC (PFD,ND & EICAS) + MCP - H/W attached will be MIP/MCP/EFIS
PC3 - AMD64 3000 - PM CDU + Active SKy - H/W attached will be FMC/CDU, TQ & Pedestal.
All will be connected via WideFS
Regards
Mike
-
Hi
Here my set up
No1: Fs-TQ drivers (Quad 6600)
No2: Cp PFD/ND (with splitter for Fo side) (P4 2.66)
No3: Upper Eicas (P4 2.4)
No4: Lower Eicas (Cel 950)
No5: Mcp + Cdu (P4 3.4)
No6: AS 6.5 + PM Sounds + FDC + Netop (Notebook)
Everything works through FSUIPC and WIDECLIENT
Dimos