THen came the front and the rear walls
Printable View
THen came the front and the rear walls
Attachment 3594Attachment 3595Attachment 3596
The sides where contructed and covered in plywood and cut to suit shape . This took forever!
Attachment 3597Attachment 3598
After the sides had been secured, I constructed the upper dash area.
Attachment 3599
Step one as seen on other thread. This started from the ground up. I have no idea why.
Attachment 3600Attachment 3601
Monitors that would be utilised for Instrumentation where contructed as displayed.
Will you building a canopy
greetz
Hi there,
Yes in time, Ive been placing all my time into figuring out the display situation and networking the computers at this time to make sure they talk to each other correctly and I have no supprises down the track.
Regards
SIRA66
Attachment 3612Attachment 3613Attachment 3614Attachment 3615
As you can see the panels fitted into the dash area nicely and once connected to the computers the display came to life. After positioning the layout a little and making some sacrifices to reality and practicality, I started to install what I could.
Attachment 3616Attachment 3618
After getting the displays working I provided the right hand side a partition for the Radar/GPS viewer. I also found that I could have instruments displayed if I shared the aircarft with another computer. This being my laptop of all things. Still heaps of work to do.
I am not happy with the layout of the instruments at all, and will try another avenue to figure this out.
Attachment 3697
Now I have dual yoke with working buttons either side. Still not able to get newly constructed Panel to display.All I get is virtual panel only otherwise I get outside view with no other panels available.
:cry: