737 Throttle Qaudrant question...
Hey Guys,
I'm interested in the exact and precise measurements for the levers the 737 TQ ie. Speed brake, flaps, parking brake, etc. I'm thinking this is more a question for the guys with the real TQ. However, if anyone has any info on this or could point me in the right direction I would really appreciate your help. BTW, I have done a few searches and found everything but this info.
In addition to the above dimensions I would also like the measurements for the metal guides (is that what there called; LOL) for the flaps, engine start. and spd. brake.
Also, where can I get my hands on the "seven panel" design plans for the thrust levers. I've seen a few but they are the four panel or three panel type for a different design than what I am planning to do.
Well, for a guy who hardly post, I sure said a mouthful tonight... LOL
Thanks in advance guys,
Ian
Use the search force Luke....
I beleive you can find the schematics on the download section of this site, additionally, if you search the forum posts here, you will find a link to a French language (France/Quebec)? website that has additional annotations as well as assembly instructions and "work-arounds." I was able to translate this page using the Google BETA translator, simple, but the translations are loose at best so it becomes an intellectual adventure. Also search the forums at FDS, and when preparing to build look over the plans several times, it is not always what it seems, typos, omissions, additions. These are usually not "as-built' plans but more drafts, and the authors seem to have found solutions during the build process. Don't get tied up on every minute detail (85% Rule), don't be afraid to modify the design to fit your own need, and most of all have fun.