Is Sioc required?

Hello all

Im working on the Jetstream 41 and by reading some very interesting posts I got a bit confused.
Basically I just ordered a OC Master and Exp. card, just to start and make tests. Rest will follow. What I dont understand is what I need Sioc for?
Example, maybe I understand something wrong.
Lets take the beloved one, the gear lever. By raising the gear, I change the input from 1 to 0, so basically, I need one input for this. As output, I endup maybe using 3, 1 output for each gear indicator light. Am I correct?

So 1st question is, what do I need Sioc for?
2) How does FSUIPC react, when suddenly 2 or 3 variables change state at the same time? How can I find out which output belongs to which?

Thanks in advance!!!

Cheers, Omar.

Hi,

Why you need SIOC?

Well, on the one hand you have a Opencockpits Master Card that connects your hardware via in- and outputs and on the other hand you have FSUIPC which provides a software interface to Flight Simulator. You need SIOC to connect these two worlds...

Example: If you raise the Gear, an input changes value which is detected by SIOC. In SIOC you program a script that modifies a FSUIPC offset based on that input change. These scripts are very simple, just one liners, but without, nothing will happen.

More info about SIOC can be found at my site. Plus lots of HowTo SIOC examples.

Your second question about FSUIPC:
FSUIPC will just do for each offset what is specified in its documentation (FSUIPC for Programmers). It is you that defines the logic in your SIOC program.

regards,
Nico Kaan

Hi Nico

Many thx for ur reply. I thought that FSUIPC detects the status changes directly without needing SIOC in between. Now things become clear..
Ok, one more question, just to feel safe :)

Since im building a non-standard aircraft, there will most probably be inputs/outputs that arent found in FSUIPC. Im talking about the offsets.
Do u know how I can connect these signals to the software?

Omar.

Quote:

---

Originally Posted by Sulfuridus

Since im building a non-standard aircraft, there will most probably be inputs/outputs that arent found in FSUIPC. Im talking about the offsets.
Do u know how I can connect these signals to the software?

---

That is a common problem for add-on aircrafts. Only the generic parts are covered by FSUIPC offsets.
With FSUIPC mouse macro's you may be able to interface switches to controls in your aircraft, but the other way round, deriving state information from your aircraft to control leds/digits and so on, is very dificult (or even impossible)l.

You better switch to an add-on with a SDK (the Level-D 767) ;-)

Nico