HELP PLEASE!!! PMsystems stops GC from working
Dear all,
iŽm running a B737 setup incl. pmsystems on FS2004. Since a few days now my PFD and ND show ATT rep. MAP only.:shock:
The CDU pos init is set correctly and I found that immediately upon or even during the start of PMsystems the normal PFD and ND displays switch to only ATT and MAP. As soon as I terminate PMsystems both PFD and ND scome back with the fully functioning screens.
Otherwise PMsystem works nicely.
What am I doing wrong or what could be the culprit for that strange behaviour.
Any hint higly appreciated.
Peter
Re: HELP PLEASE!!! PMsystems stops GC from working
IRS Alignment?
Power on?
Just some wild guesses!
Re: HELP PLEASE!!! PMsystems stops GC from working
Quote:
Originally Posted by
Sean Nixon
IRS Alignment?
Power on?
Just some wild guesses!
Thanks Sean for coming back on this.
I double checked the IRS settings. Everything seemed ok. Eventually I found a hickup on the CDU PC being the culprit.
Thanks again and best rgds
Peter
Re: HELP PLEASE!!! PMsystems stops GC from working
Quote:
Originally Posted by
PeterH
Thanks Sean for coming back on this.
I double checked the IRS settings. Everything seemed ok. Eventually I found a hickup on the CDU PC being the culprit.
Thanks again and best rgds
Peter
What was the "hickup"??? What did you have to "fiddle" with to get it to work. I'm having the same problem all of a sudden.
Re: HELP PLEASE!!! PMsystems stops GC from working
Hi,
sorry for late reply due to vacation trip.
The culprit in my case was that the aft overhead on my pmsystem was not showing and hence I forgot to switch both IRS to on.
That did the trick. Make sure your pmsystems shows the aft. overhead too. There youŽll find the IRS switches.
Hope this helps
Best rgds
Peter