Then make sure your antivirus is not messing around. It happens a lot that suddenly one application is sandboxed or blocked after a silent antivirus update...
JL
Printable View
Then make sure your antivirus is not messing around. It happens a lot that suddenly one application is sandboxed or blocked after a silent antivirus update...
JL
Hi Jeehell,
Yes, try to restart the complete Jeehell-Server and also the hardware connect app only... nothing happens. Only a complet restart of the systems solve the problem.
I will check my antivir for a blocking on this side... but i donīt think so...
Here is a picture of the workin system with SIOC. Maybe this can help?! Also you can see, that the Clientīs (ND/PFD/MCDU/EWD/SD/etc.) for the server are not connected... but it is connected and it works.
Attachment 9810
On the next time i try with downgrad do SIOC 4.x
Cheers Florian
SOLVED!
I run the OHP on a network PC and other displays on a third one. After updating all from V 36 to V 37 the client PCs could not get a connection to the FMGS server. I could solve the problem by starting the new OVHD.exe (0.37.0.0) in A320FMGS\FMGS Server manually. When I insert OVHD=yes (instead of former =no) to the Starter.ini of the installation on the server, it runs the old OVHD .exe (0.36.6.0), which still exists in my formerly used OVHD folder in the server installation, instead of the new OVHD logic.
Is it possible to change something, so that the new OVHD.exe starts automatically when StarterFSX.exe is started? Will a full new install on the server solve the problem? If so, is it possible to save the hardware profile of the FMGS_Config.exe so that I donīt have to reassign all axes and switches?
Thanks for any help!
Regards Rainer
EDIT: ExtProg.2="L:\A320FMGS\FMGS Server\OVHD.exe" to starter.ini? But I think, there should be a more elegant solution :) ...
EDIT2: A new clean install solved the problem. And it was easy to paste the saved configs in the folder FMGS Server so that I didnīt have to reconfigure the hardware settings.
Thank you for the latest update JL.
A few graphical aberrations which I have found --
Attachment 9864
Departure from Sydney (YSSY), this is with the ground warning system turned on.
Attachment 9865
Emergency Cancel sprite overlay during Landing checklist procedure on the ECAM.
1 other question to the OVHD :
Skalarki IO Software Supports the functions from the Temp Potis on AirCond Panel and Cargo Heat. Is there any reaction for that in the Jeehell Logic?
Is it possible to leave them disconnected for the 1st's Test?
regards
andy
Hi Andi,
yes, logic is supported and working. Tested on my Skalarki-system. I also implemented the temp-inputs later in my profile, becuase they were missing on initial profile. No issues until then.
Regards Henrik
Hi
What's this amber DH on PFD?
Hi JL,
had again a fmgs_server.exe crash at EDDM SID KPT1S RWY26L at around FL100. Had this behavior at SION SID's, too as reported. Is there a way to get rid of such crashes? I'am flying with IVAO and SID's are given by ATC so I need to fly that procedure... I can't understand why that happens on specific SID's. Do I need to adjust some files?
KR
Stefan
Hi all.
"Ext Pwr available" Green lamp on that Korry on my HW overhead does not coming up after selecting that function in P3D. At Software Overhead that function Illuminates Green. IO and software for that LED is also correct, the LED itself is also working. Any ideas ?