what do you need to make the digits or lights change on a radio panel using a Leo Bodner BU0836X controller board and a segmented lighted display board? A wiring diagram and picture would also be helpful.
Printable View
what do you need to make the digits or lights change on a radio panel using a Leo Bodner BU0836X controller board and a segmented lighted display board? A wiring diagram and picture would also be helpful.
You can't. The Bodnar controller is an input card, so it only connects switches and encoders.
You will need an output card.
This might help you along :
http://www.flightsimparts.eu/Simulat..._7Segment.html
Similar solutions are to be found at Opencockpits and other manufaturers.
Agreed, these are what I just fitted to my Landing and Cruise Alt displays in my FWD overhead - they work perfectly with Prosim! For radios I think you are better off buying them PnP!
http://www.flightsimparts.eu/Simulat..._7Segment.html
Cheers Gwyn
Attachment 9704Should the LED displays move on the altitude display showing the altitude when you turn the encoder dial. here's how I wired it. It don't move what do I need to change to make the numbers change in the FSX 10 program. See Attached photo.
I got them to change thanks.