Printable View
I've been scratching my head about this question for quite some time and I can't seem to figure it out. I've had a look at both Korry and Jay-El manuals and they have diagrams showing the mounting brackets etc but I still don't get how they work i.e. how they are meant to fix in place a switch which is square in shape into a square hole. They slide in, but I don't understand what fixes them in place.
The ones I've seen have a housing which has a lip that is slightly larger than the mounting hole, so it doesn't push through.
Housing pushes in from front of panel. Clip also has a lip and is a sleeve that slides over housing from rear until lip contacts panel rear, at which point the clip latches against housing body.
Panel is therefore clamped between the housing front lip and the retaining clip lip.
Cheers,
Rob
Korry looks like this
http://img709.imageshack.us/img709/7411/dscf0013o.jpg
And when i modify it:
http://img709.imageshack.us/img709/5333/dscf0012h.jpg
In the square hole on the side, there comes a pal out when you tighten the screws that hold the latch Korry solid at the back of the panel.
Thanks guys, much appreciated.
You are welcome A_S.
Thanks for the Photos Claus - Please could you tell me the type number for this Korry.
Best Regards,
Rob
Quote:
Originally Posted by RadarBob
Hi Rob
This type should be a Korry 433
http://www.esterline.com/KORRY/Produ...2/Default.aspx
During my previous work I was lucky to get the old Korry switches which were worn down. They are incredibly expensive.
I have separated the button and change the front so the text fits my MD 80 project. Both buttons on the images are modified
Many thanks for the info Claus.
I have been trying to work out which switch is used on the 737NG Collins Type MCP, and I thought that the Korry you have here looked a lot like it - Particularly the cap style.
However, I don't think 433 is the one because according to the datasheet it is a 1" indicator - Looking at the spacing between the switches on photos of the Collins, I would say that they are around 3/4".
If anybody knows the answer, or a good approximation to the original, I would be grateful for any info.
Best Regards,
Rob
Hi Rob
Sorry, I have misinformed you :(
I Have been through my "spare parts" and found out that it is not Korry contacts but "Aerospace optics inc." so check out this website.
http://www.vivisun.com/
Hi Claus,
Not to worry - They do look very similar!
Many thanks for the link - This is not a manufacturer I had previously heard of.
Looking at the information for the 3/4" version, they look to me to be very similar indeed to the type used on the Collins.
I don't think that they are the same, because they very usefully have a library of standard legends on the site, and the MCP legends are not there.
Nevertheless, there are some similar styles there with text in the top half and a window in the bottom, so I think they would make a very good substitute.
As you say, these are very expensive to buy new so I will look out for some on the used/surplus markets.
Might have a bit of work to do to get them just right as you have done (nice job by the way!), but for me that's the interesting part.
Thanks again for your help
Rob
Another question popped up - not related to the thread title... how do the korry switches or any switch of this type actually latch? Korrys have magnetic latching mechanisms? By the sounds of the manual for the Jay-El, I think they are magnetic as well, but how would a magnetic latching mechanism work? I'm having a hard time visualising it. I can't really figure it out from the images that verticallimit posted or the internal diagrams and other videos that I've seen on the topic. I know there's a spring in the equation, but that's about it.
Hi, I was just wondering, the casing for the Korry, it's made from sheet metal correct? How did they join the edges to form a robust square shape?
It seems they bend a sheet and micro-weld the seam which ends up in the center of the top side, IIRC. (I was lucky enough to find one on ebay for about $30.) :mrgreen:Quote:
Originally Posted by Atomic_Sheep
Much appreciated. I've wanted to purchase a Korry myself to play around with one a bit, see what it looks like... how it feels etc. I feel I might.