Trouble with Throttles and FSUIPC
I am trying to calibrate my two throttles in FSUIPC 4.3 for FSX (Learjet) and cannot get them to work correctly. The pots are reversed from each other in my setup. Thottle 1 when pushed full forward gives a negative value and when pulled back reads a positive. Thottle 2 is opposite. It reads positive when pushed forward and negative going back (like you would expect). Even when I check REV box on Throttle 1 and then reset and set it still reads from positive to negative values as I push forward. This makes it damn near impossible to correctly set the values for Reverse, Idle, and Max as they want to be in ascending order. If and when I get that squared away, when pulled all the way back they activate Reverse Thrust which I do not want them to do. I cannot get rid of the reverse portion in FSUIPC. I know this has to do something with Reverse thrust settings in the .air file but I dont have a clue how to edit or if one even should. I want to have the levers go back to idle detent and be at idle but then when I go past Idle detent and back to full minimum throw I dont want reversers I just want nothing or Throttle Cut. I realize I may have to put a switch back there for throttle cuttoff but it appears you can do this within FSUIPC somehow also.
I have seperate reverse thrust levers that will activate microswitches for Reverse Thrust.
Long winded I know....
Can anyone offer some tips?
Thank you
Scott