Problem since Beta3.0 installed

Hi Alan,
I dropped the 3.0 ver exe into my existing Phidgets folder and everything comes up normal but some of my switches/LEDS no longer work.
They show the True/False when I move them ok in the PH VALUE COLUMN but noT the FS VALUE COLUMN .
EG...ENGINE1_FUEL_LEVER. ON= TRUE(PH2VALUE) 0 in the FSVALUE (it should be 16384) nothing changes here. I went into the FSELEMENT to edit and everything here shows ok for assignments.

Half of my LEDS are assigned still but nothing lights even if i invert.

When I shut down 3.0 and activate the older version everything back to normal.
Do you have an idea what happened here?
Thanks
James

James,
I am getting the same kind of thing happening.
I've noticed on mine that some of the offsets are not being assigned even though the switch shows true/false and the values show 1/0. The offset and length fields are blank. Unassigning and re-assigning does not work,, Ver2.1.1 works fine.
Cam

Looks like we have problem.
Will investigate and fix.

Thanks Alan :)

Hello Alan,
All of a sudden my flaps arnt reading at all in the older version.
I tried switching sensor plugs on the 8/8/8 board and still nothing.
Everything else seems ok still.
Slowly falling apart here. :cool:

Throttle and spoilers working ok.

Kind regards
James

Having the same offset problem here: no offset assignment in Beta 3.0 (in my case the GEAR_HANDLE digital input). Works fine in 2.1.1 though... :(

Target.

A fix is on the way.
I am in middle of testing right now.