Hello,
B45 is out. Numbering starts at 45.3 because of internal decisions to postpone the release...
This is a rather big update. Next major update will include rework of the LNAV/VNAV, so it will again take some time before you see any B46 version.
Download:
http://www.jeehell.org/A320FMGS_B45.3.exe
or use the autoupdate feature.
Changelog:
-Added Batteries test logic (current spike decreasing over a few seconds after BAT is ON)
-Added fully controlled Intercom system. The system requires all audio I/O to be linked to one single computer, where the new application is running (can be done with cheap USB sound cards). This requires compatible hardware (I think Marcin/Skalarki at first will soon or already has the compatible hardware, I will add SIOC,FDS and joysticks soon)
-G/S now has the correct « half diamond » shown when deviation is at maximum deviation on the scale.
-Corrected many FMA modes interactions (G/S stays engaged once it is active, NPA approaches mode FINAL/APP NAV, and a few others)
-Corrected cases where in APPR phase, speed was not maintained (engines stayed at IDLE)
-Corrected BRAKES HOT ECAM warning not detecting the correct BRK FAN status
-Corrected AUTOLAND flare mode
-Corrected AUTOLAND warning light flashing in voluntarily manual flight
-Corrected GPWS G/S warning sound
-Tried to correcte Trim wheel not resetting to 0° after landing
-Corrected many ND routes drawing errors.
-Corrected occurrences of SID constraints not being followed in managed modes.
-AP2 altitude reference changed to FO source (either FO or STBY ADR)
-Corrected SD page blank when exiting single ECAM mode while previously on STS page.
-RNP accuracy entry in MCDU PROG page
-EO managed speed is now green dot speed.
-PFD ILS localizer scale now has the correct « half diamond » shown when localizer deviation is at maximum deviation on the scale.
-Corrected take off in EO conditions (SRS target speed is now V2 or speed at EO)
-Added EIS self test sequence
-Added EIS electrical source switching effect (diagonal line)
-Added sounds for electrical relay, avionics vent and Aircond
-Added ALTI DISCREPANCY and BARO REF DISCREPANCY warnings
Regards,
JL