New Build with NAV TEST and WX TEST - Question!

Hi,
does anyone noticed the new NAV TEST shown in the ND?
Is there any Offset for it. Will it work with CPFlight NAV Hardware (first version).
Any informations about this nice feature would be great.

Best regards
Jan

Can't speak to the wx radar test, but I have both NAV TEST buttons working with CPFlight hardware. Updated the MCP and both GC instances and it worked perfectly with no further setup required.

Thanks for the quick answer!
Do you have the CPFlight HW as USB Version or COM Version?

My CPFlight hardware connects via USB, but is assigned a COM port.

Hi,
what the NAV test is doing and how it is initiated (button,...)?

Best regards
Ruediger

Quote:

---

Originally Posted by Delphi

what the NAV test is doing and how it is initiated (button,...)?

---

There's a TEST button on the frontplate of each NAV radio. Test simply emits a UHF signal from somewhere on the aircraft (I'm not sure where) to cause the RMI VOR 1/2 needle to point to exactly 180 degrees. If an ILS is tuned, both the localizer and glideslope will move to 1 dot off center. The TEST function is basically to allow you to verify that a signal has been emitted and, indeed, the NAV radio is recognizing it.

Thanks Chris...

Does someone found the corresponding offsets? I would like to call the test from SIOC.

Best regards
Rueidger

Found the Offsets:

04F4 -->
380/1 WXR/Radar Test On/Off
382/3 NAV1 Test On/Off
384/5 NAV2 Test On/Off

See also Project Magenta Online Documentation.

Ruediger