-
5 Attachment(s)
Re: My 2nd Build
Ok things are just about finished few add ons I would still like too add like superpid & x360 control.
Very happy with results so far, Here's some more pics.
Go here for larger pics http://www.cnczone.com/forums/hobby_...2nd_build.html
Attachment 6685
Attachment 6686
Dust shoe which also shows the 2 small air pipes which cools the tool while cutting
Attachment 6687
Attachment 6688
Attachment 6689
5 Pics per post.
-
5 Attachment(s)
Re: My 2nd Build
Pump for air cooling with heat sink & fans as the air leaving pump gets warm.
Go here for Larger pics http://www.cnczone.com/forums/hobby_...2nd_build.html
Attachment 6690
G540 driver , I used some scrap 12mm aluminum for heat sink with thermal paste. Glued on with epoxy.
Attachment 6691
Attachment 6692
Built an enclosure for electrics with extra 12v & 5v on front & back if needed
Also ins & outs on g540 are connected to terminal block on back for easier connection.
Attachment 6693
Attachment 6694
Will try posting a short video soon of cnc cutting
Cheers
Riche.