PDA

View Full Version : Servo Phidget .INI settings



imported_737nut
09-11-2005, 01:44 PM
Alan,
If i missed it in the docs i apologize but what will these 2 settings affect?

RateThreshold=0
Step=0.1

I have the servo moving the throttle levers and am looking for smoother operation. Right now it is jerky in motion but moving in relation to the data from FS9. Is there a possibility to add a filter to the FS9 data. That way the movement would be smoother. In the real deal, 100% throttle to idle takes 15secs!
Thanks,
Rob

alandyer
09-11-2005, 04:01 PM
Rob,

On what screen do you see
RateThreshold=0 and Step=0.1 ?

Is that on the calibration or the FS Editor screen ?

Regards,
Alan.

imported_737nut
09-11-2005, 04:05 PM
Alan,
That is in my PhidgetServo 3666 interface INI file. I also just e-mailed you some info ;)

alandyer
09-11-2005, 05:26 PM
Rob,

What version are you using ?
Moved away from editing INI files directly with release 2 onwards.

Regards,
Alan.

imported_737nut
09-11-2005, 05:38 PM
3.12, the latest and greatest? I manually did that to see if it changed anything.
Rob

alandyer
09-11-2005, 05:40 PM
To be entirely accurate, 2.x was last version where one needed (or should) work directly with ini files.

imported_737nut
09-11-2005, 06:50 PM
To be entirely accurate, 2.x was last version where one needed (or should) work directly with ini files.
I understand but what do they do and or affect?

alandyer
09-11-2005, 07:27 PM
Becase I do not want to set a precedent I am going to decline providing support for editing ini files.

Those two settings are not relevant for servos.

I would suggest playing with the Refresh value.
This deterimes how often software sends a position signal to the servo.
Not sure what you mean by a filter.

Might also drop Rob Howard a line.
Hopefully, someone who has got their auto-throttles working will respond.
To my knowldege there are builders out there who have smooth motion.