V/s Help Please

[imported_MattO]

Alan, anybody else, HELP.........

This is driving me nuts... and no help from PM :(

Got everything else working on the MCP/FCU but the V/S.

----------------
After hours of playing around, I found out when I turn the Encoder, and as the FSValue increase, and reaches 50 the V/S changes to 0100 (there is no change in the V/S, it stays at 0000 untill it reaches 50), then as I continue to turn and the FSValue increases to 150 the V/S changes to 0200.

50=100
150=200
250=300
350=400
and so on.....

----------------------------
In the FS2PhUIPC.INI file

[FCU_V/S_SET]
Offset=540C
Length=2

I've tried Mulitpliers, divisors.... got now where..... help :confused:

Matt O.

[imported_MattO]

ADDITION

With Version 2.0.8
Now when I read the V/S I get the FSValue displayed in the TXT LCD. Does this mean I need to enter a divisor?

Matt O.

;
;PM_Airbus_FCU
;
;FCU_READ
;
[FCU_READ_ALTITUDE]
Offset=04E4
Length=4
Multiplier=100
Format=#####
[FCU_READ_HEADING]
Offset=4E2
Length=3
Format=###
[FCU_READ_VERTICLE_SPEED]
Offset=04E6
Length=3
Format=###
[FCU_READ_IAS]
Offset=4E0
Length=3
Format=###
[FCU_READ_MACH]
Offset=4E8
Length=3
Format=###
;
;FCU_SET
;
[FCU_SET_IAS]
Offset=5406
Length=2
[FCU_SET_HEADING]
Offset=5408
Length=2
[FCU_SET_ALTITUDE]
Offset=540A
Length=2
[FCU_SET_VERTICLE_SPEED]
Offset=540C
Length=2
[FCU_SET_MACH]
Offset=540E
Length=2

[alandyer]

Matt,

Will not be able to emulate your set-up for a few days.
Have to re-arrange my PCs, software and/or hardware to do this.
I am releasing 2.0.9 a little later this evening.

This release addresses servo smoothness and sound.

But, FCU V/S may work with new version
by adding setting
Step=100

Regards,
Alan.

[imported_MattO]

Good news!!!

FS2Phidget V2.0.9 with the STEP setting at 100 fixed the problem.

[FCU_V/S_SET]
Offset=540C
Length=2
Step=100

Regards,
Matt O.


SUCCESS!!!!!!! AtaBoy Alan, four pats on the back :D