PDA

View Full Version : Korry switch replica?



Conner
05-01-2017, 11:37 AM
We are in the planning process for a 767 cockpit. I have located a possible alternative to expensive korry switches. I'm wondering If anyone thinks its possible to modify these push buttons with a divider and 2 leds. I would need to add a small hole for additional wiring.

https://www.amazon.com/Uxcell-a12062700ux0077-Square-Button-Switch/dp/B008MPK5WS/ref=pd_bxgy_60_img_2?_encoding=UTF8&pd_rd_i=B008MPK5WS&pd_rd_r=TKENF1W3QTZGEKRQ92X8&pd_rd_w=dceGv&pd_rd_wg=OewcK&psc=1&refRID=TKENF1W3QTZGEKRQ92X8

You guys can follow here.
https://www.facebook.com/simmemphis767/

Not much yet.
I think this is the right form for this.

iwik
05-01-2017, 01:17 PM
Hi Conner,
Have a look here, DIY korrys if you are handy with a drill press.
https://web.archive.org/web/20150909163423/http://home.hccnet.nl/jwopdenakker/building%20tip.html

Regards
Les

jonesthesoftware
05-02-2017, 09:32 AM
Hi Conner
I presume you've seen the Open Cockpit version here
http://www.opencockpits.com/catalog/switch-type-korry-monoff-momentary-p-359.html?cPath=24_55
15 euros each X full cockpit gets a bit expensive though. They do come with legends and leds complete ready to go. Alternative is of course to make your own. Do you have a cnc machine or access to one? I have a complete set of designs for a 767 cockpit including circuit boards and many 3D drawings which can be used for 3D printer if you need them.

regards
geoffhttp://www.mycockpit.org/forums/attachment.php?attachmentid=12288&stc=1

Conner
05-02-2017, 10:09 AM
Unfortunately I don't have access to a 3D printer or cnc. I need to go in 50 50 on one so both the 767 and my 737 projects could benefit.

Conner
05-02-2017, 10:46 AM
Hi Conner,
Have a look here, DIY korrys if you are handy with a drill press.
https://web.archive.org/web/20150909163423/http://home.hccnet.nl/jwopdenakker/building%20tip.html

Regards
Les
This looks like the best solution. I will need to order the acrylic rod and latching switches.

Conner
05-02-2017, 01:12 PM
So this is kinda how I expect to install the home built korry's if I build them like iwik's link above. The only problem I see is the back lighting leaking around the switch holes.
Great paint drawing for you guy's.
https://scontent-dft4-1.xx.fbcdn.net/v/t34.0-12/18217474_1510183175682737_627847068_n.png?oh=5b04868797664c72b42f8e0683f3a16c&oe=590BAF85

cmdr114b
05-02-2017, 03:46 PM
He actually does say in his text "You need to paint the sides of the cubes black to block the light."
John

Conner
05-02-2017, 07:08 PM
He actually does say in his text "You need to paint the sides of the cubes black to block the light."
John


Yes, to block the lights in the cube. My concern was the panel backlighting from behind leaking between the cube and the panel. I guess I could make some sort of shield back to the switches.

jonesthesoftware
05-03-2017, 06:13 AM
Won't you need a flange around the clear plastic bit to stop it falling out the front? This flange would then block the backlight around it. You can see how I did it in the picture
regards
geoff




http://www.mycockpit.org/forums/attachment.php?attachmentid=12289&stc=1