PDA

View Full Version : Need some drawings in *.cdr to direct to CNC.



Misiek1916
03-17-2015, 06:23 PM
I need to have some drawings of 737's panels.
The best format will be CorelDraw.
As most i need the overhead panel.
Thanks for all.
Sincerely, Maciej.

m0ng00se
04-25-2015, 11:04 AM
I need to have some drawings of 737's panels.
The best format will be CorelDraw.
As most i need the overhead panel.
Thanks for all.
Sincerely, Maciej.

Why not draw it yourself :) ...

To work out proper panel dimensions use this guide, it's excellent and takes out a lot of guesswork : http://www.mycockpit.org/forums/content.php?r=165-Hessel-Oosten-s-Panel-Building-Focussed-On-Dimensions

Then use something like this to get you started : http://users.skynet.be/jcordon/cockpit/dimensions/images/737_overhd_B.jpg

If you use the first guide, you know the width of the panels to scale it properly. The middle panel is 68mm

Happy drawing :D