PDA

View Full Version : Invisible Aircraft



Jerrymc3
03-05-2013, 04:58 PM
Sometime during almost every flight my aircraft turns invisible; some parts may be visible but the outer skin is usually gone. I would think with the hardware I have now it would have solved this problem. I surely thought the Nvidia 680 would do the trick. Also, sometimes when I try to change aircraft, either from the Free Flight window or in flight it lags for a while, sometimes 2 or 3 minutes.

Jerry

Jerrymc3
03-05-2013, 04:59 PM
Forgot to list my hardware:

COCKPIT SYSTEM SPECS
FSX ACCELERATION
Home Cockpit based on B747-400
Project Magenta Boeing Aircraft Software
Altec Lansing VS5237 5.1 Surround Sound

SYSTEM 1
(COCKPIT-1)

EVGA Z77 FTW Motherboard
Intel i7 2700K @ 3.5 Ghz
Cooler Master (http://www.microcenter.com/search/search_results.phtml?N=4294966128) Hyper 212 Plus Universal CPU Cooler
Corsair Vengeance 8GB 800MHz DDR3-2000 PC-16000
Matrox TripleHead2Go
Evga 680 GTX 4096MB DDR3
Evga GTX 285 DDR3 1024MB DDR3
Seagate 500GB SATA II
Seagate 1.5TB SATA II
Sandisk 240GB SSD-FSX
Cooler Master 1200w PS
(3) Samsung 46 HDTVs-Front surround view
ViewSonic 22 LCD-Left view
Asus 23 LCD-Right view
Windows 7 64-bit

SYSTEM 2
(COCKPIT-2)

NForce 750i LT SLI Motherboard
Core 2 DUO E8400 @ 3.0 Ghz
Corsair 4GB 800MHz DDR2
Evga GT 295 DDR3
Evga 8800 GT 512MB DDR3
Seagate 500GB SATA II
Cooler Master 750w PS
AOC 24 LCD-Captains PFD/ND
ACER 23.5 LCD-Overhead & MCP
Chemei 19 LCD-Primary ECIAS
eMachines 15.5 LCD-Secondary ECIAS/CDU
Windows 7 32-bit

SYSTEM 3
Intel D865PERL Motherboard
Intel Pentium 4 3.0 Ghz cpu
Corsair 4GB 800MHz DDR
Geforce4 512MB Graphics card
AOC 24" LCD-First Officer PFD/ND
Seagate 500GB SATA II
300w PS
Windows7 32-bit

blueskydriver
03-06-2013, 02:21 AM
Hi Jerry,

Which DirectX mode are you using? FSX will work with DX10 preview mode, but it will cause all sorts of issues with aircraft and scenery, so make sure DX10 preview mode is unchecked in the FSX settings; thereby, making FSX use DX9.0c

Otherwise, are your video drivers updated for your video card and are you tweaking FSX or using Nvidia Inspector? If not, update your drivers, and then check any settings within Nvidia Inspector and any tweaks you might've made...

BSD

Jerrymc3
03-09-2013, 10:31 PM
I wasn't using DX10 Preview. I did download and run Nvidia Inspector and it apparently helped. I flew from Aspen to FTX Jackson Hole and my frame rates were 26 at KJAC and no aircraft or aircraft parts missing. GSX vehicles were there too but the follow me vehicle was just a shadow on the ground and another invisible vehicle went by with only a head driving it . Those were the only problems I noticed. All the buildings were there and the airport was heavily populated.

Jerry

Jerrymc3
03-10-2013, 11:50 AM
Forgot to mention I'm also using FSPS FSX BOOSTER which also increased FSX performance considerably.

Jerry