Boeing First Officer PFD error

[Jerrymc3]

I finally purchased the Project Magenta Boeing First Officer software but I’m getting a “Run-time error 9: Subscript out of range” error when I start the FO PFD. Wide client says its connected and Wideserver says 2 Connected so I’m not sure why the FO PFD won’t load. The Captains Glass Cockpit, CDU, MCP and pmsystems are all working fine as well as the RCDU. I posted the problem on the PM forum as well as a Support Ticket a couple of weeks ago but still haven't gotten a reply. I ran pmFileCheck and these are the results.


pmFileCheck Build 70
Opening Connections
Windows XP
Windows Indexing Service is OFF (good)
Local Path: C:\Project Magenta
Checking Computer and User Name
Local Computer Name: COCKPIT-3
Local User Name: JERRY
FSUIPC/WideFS found!
FSUIPC Check 927989760
FSUIPC Check 0×37500000
FSUIPC Version 3.75
Lat/Lon/Alt/Hdg
480710N 0163323E 671 72
FS Version: FS2004
WideServer Version 6.78
WideClient Version 6.78
Flight Simulator Running
Testing FS Framerate and Data Rate for 10 seconds
FS Framerate Avg / Min / Max: 16.6 / 12.1 / 20.2
Data Read Rate in ms Avg / Min / Max: 44.5 / 31 / 78
Data Rate: 225 Ticks 22.5 data sets / sec
Read Attempts: 296 with 29.6 data sets / sec
Read Same Value: 71
OK – GC Detected
GC Build 494
OK – FMC Detected (CDU or MCDU)
FMC Build 495
OK – A/P Detected (MCP or FCU)
A/P Build 490
OK – pmSystems Detected (MCP or FCU)
pmSystems Build 185
Local Directory is C:\Project Magenta
Local DLL Files Found:
pm.dll dated: 5/21/2012 9:35:43 AM
Checking FS Path
OK – Reported FS Path \\COCKPIT-1\FS2004\
Trying to access FS Path
OK – Read access to FS Path
OK – Read/Write access to FS Path
OK – Read/Write access to FS Path
Wide Server reports:
67031 Connected to computer “COCKPIT-2″ running WideClient version 6.780 (skt=13744) TCP
79062 Connected to computer “COCKPIT-3″ running WideClient version 6.780 (skt=19680) TCP
Looking for NETDIR from CDU
Reported NetDir is: \\cockpit-2\netdir\
Checking PMNETDIR Path (FMC Generated Path)
Error reading files: 80
No Files found in NetDir
> please check NetDir settings and User Account Control (Win7)
Checking FSPLANS Path (To Load/Save FS Flightplans)
OK – Read/Write access to FSPLANS Shared Folder
110 File(s) found in FSPLANS, last date is 7/16/2012 6:53:00 PM
last flight plan file is IFR Heathrow to Schiphol.PLN
dated: 6/26/2012 8:19:22 PM
List of active processes:
[System Process]
System
smss.exe
csrss.exe
winlogon.exe
services.exe
lsass.exe
svchost.exe
svchost.exe
svchost.exe
svchost.exe
svchost.exe
svchost.exe
explorer.exe
spoolsv.exe
VM303_STI.exe
jusched.exe
iTunesHelper.exe
msmsgs.exe
ctfmon.exe
devldr32.exe
svchost.exe
AppleMobileDeviceService.exe
CTSVCCDA.EXE
jqs.exe
npkcmsvc.exe
nvsvc32.exe
svchost.exe
MsPMSPSv.exe
iPodService.exe
alg.exe
wscntfy.exe
WideClient.exe
RCDU.exe
pmFileCheck.exe

Closing Everything
7/28/2012 11:16:55 PM
Things To Do:
* Verify NetDir setting, see Manual


All pertanent folders are shared and I'm not aware of any NETDIR settings
I need to make. Would really appreciate some help. I'm suprised PM isn't responding.

Jerry

COCKPIT SYSTEM SPECS
Home Cockpit based on B747-400
Project Magenta Boeing Aircraft Software:
CAP GC, CDU, MCP, FO GC, RCDU, pmSystems
Altec Lansing VS5237 5.1 Surround Sound

SYSTEM 1
(COCKPIT-1)
EVGA P55 FTW Motherboard
Intel I7 875K @ 2.93 Ghz
Cooler Master Hyper 212 Plus Universal CPU Cooler-2 Fans
Corsair 12GB 800MHz DDR3-2000 PC-16000
Evga GTX 285 DDR3
Evga GTX 8800 GT DDR3
Seagate 500GB SATA II
Seagate 1.5TB SATA II
SoundBlaster X-FI Extreme Gamer
Cooler Master 1200w PS
Matrox TripleHeadToGo
(3) Samsung 46” HDTVs-Front surround view
ViewSonic 22” LCD-Left view
Aesus 23” LCD-Right view
Windows 7 64-bit
FS9/FSX
SIOC

SYSTEM 2
(COCKPIT-2)

NForce 750i LT SLI Motherboard
Core 2 DUO E8400 @ 3.0 Ghz
Corsair 4GB 800MHz DDR2
Evga GT 295 DDR3
Evga 8800 GT 512MB DDR3
Seagate 500GB SATA II
Cooler Master 750w PS
AOC 24” LCD-Captains PFD/ND
ACER 23.5” LCD-Overhead & MCP
Chemei 19” LCD-Primary ECIAS
eMachines 15.5” LCD-Secondary ECIAS/CDU
Windows 7 32-bit
Project Magenta


SYSTEM 3
(COCKPIT-3)

Intel D865PERL Motherboard
Intel Pentium 4 3.0 Ghz cpu
Corsair 4GB 800MHz DDR
Geforce4 512MB Graphics card
Chemei 19” LCD -Copilot PFD/ND
Seagate 500GB SATA II
300w PS
Windows XP



IOCARDS
(2) USB EXPANSION CARD
(6) MASTER CARDS
(5) 7 SEG DISPLAY CARDS
(10) 5 DISPLAY HOLDERS
(1) USB RELAYS CARD
(1) USB KEYBOARD EMULATOR CARD
(1) USB AXIS CARD

[Jerrymc3]

Finally got it to work. Uninstalled and reinstalled the PFD and its functioning as it should but it still isn't displaying my flight plan. Haven't had time to work on that yet.

[skino]

Once, you have tested, whether with Ctrl O CDU and MCP are recognized. However, the flight plane can be seen in the ND not in the PFD ;). Do you have PFD and ND in the same window?
http://img171.imageshack.us/img171/9435/86942045.jpg (http://imageshack.us/photo/my-images/171/86942045.jpg/)

[blueskydriver]

Your error lies here:

Checking PMNETDIR Path (FMC Generated Path)
Error reading files: 80
No Files found in NetDir
> please check NetDir settings and User Account Control (Win7)

Did you go into the pfd.cfg and change the netdir to the location of \\cockpit-2\netdir\

That location is what's reported, so the pfd.cfg should have that next to the netdir= Otherwise, it will not see your files and allow the ND to work...

BSD

[Jerrymc3]

Very strange, I go into the pfd.cfg file and under [Network] enter netdir=\\COCKPIT-2\CDU\NETDIR, (that's where it actually is) save and then start the PFD but still no flight plan on the ND. I go back to the pfd.cfg file and my netdir entry is gone. I entered it again and the same thing happened. (3 times) I don't understand why it keeps getting removed. COCKPIT-2 is the name of the computer where my Captains PFD/ND, FMC, CDU and pmSystems software are. The FO PFD/ND and RCDU are on the COCKPIT-3 computer. Is my entry for netdir wrong? And yes, the PFD & ND are in the same window.

Jerry

[Sean Nixon]

Make sure the PFD is not running or any changes made to the cfg file are overwritten when you close it.

[blueskydriver]

Okay, little unsure about the First Officer and RCDU, but for the FO PFD.ini you should not have anything that says "netdir=". It should be type=cdu under the network sub-title. If you're trying to type "netdir=whatever" in the FO PFD.ini it will not save it.

You must make sure that the CDU.ini file has the netdir=file folder location and save it. That is the only location where "netdir=" is used. Look at your Capt's PFD and if it is working, the FO will be working the same, you just use a different F key to switch the PFD/ND around for the FO side...

BSD

Edit: the RCDU does not use the "netdir=" either...