PDA

View Full Version : New ICS Plug & Play FWD and AFT overhead



dnoize
05-17-2011, 06:24 PM
Last november on the aviodrom show CPflight and FlyEngravity announced our new ICS Plug & Play FWD and AFT overhead.

Meanwhile several of these have been shipped to our customers. #1 being used full time in the 6 axis motion simulator we build for Simsensation (www.simsensation.nl).

The new ICS overheads are a complete co-development from FLYengravity and CPflight.

Mail us for pricing.

Some key features:

FWD overhead:
* PCB based, wiring is reduced to a minimum. The APEM switch version has no wiring at all (APEM switches mounted on the PCB), the Honeywell version only has wiring to the Honeywell switches..
* modular system, so maintenance friendly. seperate modules are connected through flatcables.
* One usb connection for the entire FWD and AFT overhead.
* Build in an aluminium powdercoated case
* Aluminium powdercoated frame with dzus replicas.
* Aluminium powdercoated backpanels
* Internally backlit lightplates. The lightplates are connected to the backpanels with a 2 pin connector.
* Plug and Play ICS interface: no need for any configuration. Natively supported by PMsystems, Flightdecksoftware and Prosim737
* Brightness of the backlit panels can be adjusted
* Functional solenoid startswitches
* Solenoid Yaw damper switch
* Solenoid wing anti ice switch
* Functional displays on the electrics panel
* Functional displays on the Pressurisation panel
* Functional Presurisation valve gauge
* All knobs included.
* Standard: APEM locking toggle switches. These look similar to the honeywell switches, but are slightly shorter and have a alumium cap.
* Optional: Honeywell locking toggle switches with white cap. The same ones as used in the real 737.
* Optional: All other gauges.

AFT Overhead:
* Connects to the FWD overhead, so one usb for the entire overhead.
* Build in an aluminium powdercoated case
* Aluminium powdercoated frame with dzus replicas.
* Aluminium powdercoated backpanels
* Plug and Play ICS interface: no need for any configuration. Natively supported by PMsystems, Flightdecksoftware and Prosim737
* Brightness of the backlit panels can be adjusted.
* Functional IRS with a custom made alfanumerical LCD display.
* Functional IRS keypad (when supported by the software)
* Functional LE flaps panel
* All modules functional, including EEC panel and radio management panel (when supported by the software).
* Optional: Oxy gauge


Now for the pictures:

FWD and AFT overhead fitted in the Simsensation motion sim we build.

http://members.casema.nl/pago/ico1.jpg


Close up pictures with the honeywell switches fitted:

http://members.casema.nl/pago/ico2.jpg
http://members.casema.nl/pago/ico3.jpg

The Electrics Panel:

http://members.casema.nl/pago/ico5.JPG


Overview:

http://members.casema.nl/pago/ico6.jpg


The ICS interface PCB's from the back:

http://members.casema.nl/pago/ico7.jpg


The AFT overhead:

http://members.casema.nl/pago/ico8.JPG
http://members.casema.nl/pago/ico8a.JPG

The IRS display with Alfanumerical lcd display, backlit keypad and correct knobs:

http://members.casema.nl/pago/ico9.JPG
http://members.casema.nl/pago/ico9a.JPG

Radiomanagement panel and EEC panel:

http://members.casema.nl/pago/ico11.JPG
http://members.casema.nl/pago/ico12.JPG