PDA

View Full Version : PM Systems not recognising Phidget LED64 Board



Joe Lavery
02-24-2009, 08:42 PM
Hi,

I've just begun interfacing my setup and PM Systems is not recognising the Phidget LED64 Board. The menu option is there but it simply says "Not Initialized/Detected".
I understood that the options would become available once the LED64 board was installed, it that incorrect? Do I need to do anthing else to get it working?

Any help would be appreciated.

Thanks

Joe

michelmvd
02-25-2009, 04:51 AM
Hi Joe,
Do you have an phidget.txt file in your PM System map ?
B. Rgds
Michel

Joe Lavery
02-25-2009, 01:28 PM
Hi Michel,

Yes the Phidgets txt file is in the PM systems directory, although it only contains the single line //Phidgets.
I understood that the options would become visible once the LED64 card was installed. It is recognised fine by the PC using the Phidget control panel, and the leds I attached work using the test within this program but it's not recognised by PMsystems.

Any thoughts would be apprciated.

Regards

Joe.