PDA

View Full Version : CPU specs



imported_767300
01-11-2009, 12:44 AM
Ok guys one more time Disappointed or Happy?:

Thermaltake Xaser VI MX Middle Tower Gaming Case w/420W Power Supply Silver/Black

800 Watt -- Power Supply Quad SLI Ready

Intel Core 2 Duo Processor E8600 (2x 3.33GHz/6MB L2 Cache/1333FSB)

INTEL Certified Liquid CPU Cooling System kit

eVGA Nvidia nForce 790i Ultra SLI Chipset w/7.1 Sound, Gb LAN, S-ATA Raid, USB 2.0, 3-Way PCI-E MB

4 GB [2 GB X2] DDR3-1333 Memory Module OCZ-Gold or Major Brand

NVIDIA GeFORCE GTX 280 1 GBw/DVI + TV OUT VIDEO

1 TB HARD DRIVE [Serial-ATA-II, 3Gb, 7200 RPM, 16M Cache]

Will these specs handle FSX,using TH2Go,LevelD,undocking the instruments over 3monitors??Thanx for input

Dan

Michael Carter
01-11-2009, 01:01 AM
I wish I could tell you, as I couldn't afford that right now with an upcoming radio upgrade, but FS9 would smoke on that system. :D

Having never had FSX, nor a desire for it, I would still say that processor, the L2 cache, FSB, and memory would do OK with FSK.

Not sure about using three monitor with it. Someone will be along to advise.

Kennair
01-11-2009, 02:04 AM
Dan, I'd say that system will run FSX over 3 screens no problem. I run on 5 screens with a Q6600 and two 8800GT's with 4Gb on Vista64 so yours should scream!

Just a couple of notes; If you're going to get 4gb of RAM you'll need a 64 operating system to actually utilize all of it. Either XP64 or Vista64 (I use Vista64, which will also give you the DX10 option). And then set it up correctly (I know, there are a thousand different interpretations of "correctly"). I would HIGHLY recommend heading over to Simforums (http://www.simforums.com/forums/forum_topics.asp?FID=38) and read everything posted by NicN. He also has a complete guide to hardware, installation, software & FS setup, tweaking etc. etc. Many, many have gained by his guide. At least take a look.

Bottom line is that you can buy the top end hardware and be dissapointed and it'll have nothing to do with the hardware. We are far from "plug & play" in this world!

Good luck,

Ken.

imported_767300
01-11-2009, 09:58 AM
Hey Michael,Ken, thanx for your input!:)

Katy Pluta
01-12-2009, 03:32 PM
If the computer is for FS only a 9800GTX+ card will be enough, no need for a GTX280 and its inflated price...

imported_767300
01-13-2009, 07:04 PM
Am i gonna need one video card for the TH2go visuals,and one card for the undocked Leveld instruments over 3 monitors?


Dan

andarlite
01-14-2009, 12:01 AM
Hi Dan

I'm a little confuse from your 1st post and the last post as to how you are planning to do your visuals.

Are you planning to use 3 monitors with the TH2G for your scenery and 3 additional monitors for the undocked Level D instruments? If this is what you are planning, then yes, you would need 2 video cards that have 2 vga outputs each. The TH2G (with 3 monitors) would connect to video card 1 out. Now with the 3 instrument monitors, one would connect to the 2nd vga out of video card 1 and the other 2 monitors would connect to video card 2.

Regards,
Henry

imported_767300
01-14-2009, 06:26 PM
Hi Henry,you got it right thats exectly what Im planning except Im going for 3 projectors as my visuals.I think Im going to step it up to a Q9550 or Q9650.

Dan