PDA

View Full Version : Cws



HauptChr
08-01-2008, 07:40 AM
<title></title><style></style>will it come ?


CWS Mode

You activate CWS mode at the MCP (only press CWS)
in PDF should be now in yellow : CWS R, CWS P (Roll und Pitch input)

Inputs for the autopilot (AP) will now be given by the control column.


AP will now hold a constant attitude (pitch), A/P stabilizer trim is working and the pitch limit is +/- 22°

AP will now hold a constant roll attitude if bank > 6° .
If bank <= 6°, HDG hold mode will be active. (wings level) Maximum bank angle is 30°


When only CWS was prressed and we should now maintain HDG, we press CMD (preen CMD visible in PFD, yellow CWS R and CWS P indication in PFD) and we press HDG on MCP -> HDG SEL and CMD green indication in PFD, yellow CWS P in PFD. This is called "split axis operation" (in this case HDG maintained by autopilot, pitch conrtrolled by pilot via CWS)

or another example :
We had pressed CMD A plus HDG plus ALT HLD active and we deselect ALT HLD -> PFD CMD green and CWS P yellow plus A/P P/RST button flashing yellow.


Will this be avail in near future ?

best regards
Christian

Trevor Hale
08-01-2008, 09:46 AM
Christian,

You may want to send that off in an email directly to Project Magenta.

As they do not "regularly" troll these forums. they are generally used for builders to help other builders with their project magenta questions.

Best regards,

Trev

dulcy
03-21-2010, 03:22 PM
<title></title><style></style>will it come ?


CWS Mode

You activate CWS mode at the MCP (only press CWS)
in PDF should be now in yellow : CWS R, CWS P (Roll und Pitch input)

Inputs for the autopilot (AP) will now be given by the control column.


AP will now hold a constant attitude (pitch), A/P stabilizer trim is working and the pitch limit is +/- 22°

AP will now hold a constant roll attitude if bank > 6° .
If bank <= 6°, HDG hold mode will be active. (wings level) Maximum bank angle is 30°


When only CWS was prressed and we should now maintain HDG, we press CMD (preen CMD visible in PFD, yellow CWS R and CWS P indication in PFD) and we press HDG on MCP -> HDG SEL and CMD green indication in PFD, yellow CWS P in PFD. This is called "split axis operation" (in this case HDG maintained by autopilot, pitch conrtrolled by pilot via CWS)

or another example :
We had pressed CMD A plus HDG plus ALT HLD active and we deselect ALT HLD -> PFD CMD green and CWS P yellow plus A/P P/RST button flashing yellow.


Will this be avail in near future ?

best regards
Christian



Hello,
I use Fsx, Glass cockpit and MCP 737 cp flight but When I engaged CWS I don't see anytiing on PFD
How Do I make to active the CWS
Thant you for hlep
Jacky

Jan Pemöller
03-29-2010, 03:35 PM
@jacky: this is a whish ... it is not implemented yet in the project magenta software!

dulcy
03-29-2010, 04:11 PM
Jan

Thank you for you response
I was searching the answer since along time.
Regards
Jacky