PDA

View Full Version : Pmsystems and phidgets problem



737NUT
04-13-2008, 10:20 PM
I have 3 phidget 0/16/16 connected and in pmsystems, i have phidgets and I/o hardware enabled. When i turn my switches on/off i can see the states changing in the text box at the bottom of the display. When i exit pmsys and go to my phidgets file in pmsys it is blank!

Isn't it supposed to save my phidgets id's and assignments??

Thanks,
ROb

dnoize
04-14-2008, 04:54 AM
I suppose you allready tried saving phidgets.txt manually in your editor after adding your assignments ?

Stef

Thomas Richter
04-14-2008, 09:39 AM
Do you use latest pmSystems 110?

737NUT
04-14-2008, 11:50 AM
Do you use latest pmSystems 110?

Yes i am.

I know in the past, when you enabled phidgets, it read the available cards, saved it to the text file then you went in and added your various inputs in the proper place and saved it. Now all it is doing is saving a file that looks like this,


//PHIDGETS

dnoize
10-27-2008, 03:31 PM
Hi Rob,

Did you ever solve that problem ? I seem to have the same problem now.

only
//phidgets
in the phidgets.txt and nothing else. Phidget boards are not recognized.

Stef

Thomas Richter
10-27-2008, 04:35 PM
Hi

Windows XP or Vista?

dnoize
10-27-2008, 07:04 PM
hi thomas,

its with both....

Thomas Richter
10-27-2008, 07:16 PM
I saw this only with Vista.
In XP you need to select in the menu that Phidgets is connected. Then it will create a txt file that contains what you described. After the file is created press the "RELOAD" button and the correct file is there.
I tried this right now here as well with a seperate 16/16 card with no problems.

dnoize
10-27-2008, 07:27 PM
just downgraded to an old version and no problems there....but with the latest builds it didnt recognize the 0/4/4

will try again tomorrow and with another phidget board too...

thanks again thomas...

Peter Nielsen
10-30-2008, 09:40 AM
I am lately not even using PM systems as the latest version commands an engine shut down at random.. usually when taxxing to an active runway or sometimes whilst on cruise.. rather annoying also PM Systems is not at least on my PC shutting down phidgets.. ie even after the PC that runds PM Sys and Phidget closes down the annunciators keep on..

Anyone has an older version of PM Sys to send to me please?
PM108 would be good for me..

dnoize
10-30-2008, 11:25 AM
I also solved the problems by going back to an older version.

but i only had a really old version. so if someone still has the 1.08 or 109 update, it would make me very happy.

Stef