PDA

View Full Version : Recall test with PMsystem110 file



Jan737
02-15-2008, 02:44 PM
Hi all,

I was wondering if it's possible to do a recall test with the master caution button and the latest pm system file.
I'm looking in the logic file but can find any code for that.
If I'm right there was some logic code in the Thomas Richter files in the past.

Any body who can help me with this?

Best regards

Jan Geurtsen

Pierre24
02-15-2008, 07:01 PM
Hi,

tried this offset: 56F8.1 (56F8 .1 RecallSwitch)

regards


Pierre

Jan737
02-16-2008, 09:59 AM
Hi Pierre
Yes I know the offset, by the way what's the difference between the re-call switch and master caution switch?
I thought it's the same....
I'm looking for the logic, when I push the re-call button there must triggerd some actions....
If I remember right it was in the Thomas Richter files in the past.

So, who can help me with this?

Best regards
Jan Geurtsen

Pierre24
02-16-2008, 11:09 PM
Hi Jan,

It's not the same.
From a book: Cockpit panel notes

Master Caution:
-Illumined: a system annunciator has come on
-Press to turn off Master Caution light and system annunciator light
-Resets system for additionnal Master Caution situations

system annunciator: (With Recall)

-Illuminated:an amber light, relating to illuminated system annunciator, has illuminated on forward overhead, aft overhead, or overheat/fire protection panel
-Cap anf FO annunciator are different;show respective panel locations
-To extinguish, press either Master Caution
-To Recall existing faults after resetting, press the system annunciator recall panel to "see" the item that still has a problem

Regards

Pierre

Jan737
02-17-2008, 10:40 AM
Hi Pierre

Thanks for the info, I have to look how I can connect a switch to the system annunciators.


Best regards

Jan Geurtsen